Asus eee pc 701 bios update#

These threads might be useful for UNR 10.04Д®ee PC 1001P and 1005PX with UNR 10.04 confirmed with the backport wireless module sudo apt-get update It's probably worth checking before you start, too. Reboot and tap F2 to get to your BIOS to check. If after completing the relevant steps below you still do not have wifi, check that it has not been disabled in your BIOS.

Asus eee pc 701 bios driver#

It is supported in Intrepid using the free ath5k driver in the linux-backports-modules-intrepid-generic package. Most models of the EeePC use an Atheros card which is not supported by default ( Bug #182489). If wireless is NOT working out-of-the-box, then I suggest following this procedure to get help from the community: Alternatively you might check your hardware with the lspci command. Should show which hardware the machine has for networking (including for internet access). If you are unable to obtain an IP address with your EeePC after a fresh installation, you may need to do the following. I also had to throw atl1c into conf/modules. A quick workaround to this is unpacking the squashfs and initrd in casper/ and put the atl1c.ko that is included in the squashfs of casper, into initrd (a howto on creating the initrd is out of the scope of this document, I'd say). Enable these again in the BIOS if you want them.Some EeePC 9 users have found that the Ethernet connection does not function after a fresh Ubuntu installation (this does not seem to affect every user) ( Bug #219662).ДЇor the 1005H* model and possibly others: when attempting to install Ubuntu via PXE (Netboot) you will find that only atl1.ko and atl1e.ko are included in the initrd.lz of Ubuntu 9.10, which will stop you when trying to mount through NFS.

Asus eee pc 701 bios Bluetooth#

One thing I should note: It disables the Wireless, Camera, and Bluetooth for some reason. It will ask you to hit F1 to enter Setup. It will prompt you when you restart that the settings were lost, and everything was reverted.

After the BIOS update is completed, your BIOS settings will revert back to factory defaults.Please press power button to shut down the system. If you want to recovery with an USB device.ДO KEEP the power supply on and NOT touch the system while performing BIOS Please do NOT insert any disc into CD-ROM or Floppy drive Otherwise, it should look similiar to this: If it halts at вЂњReading file 1000.ROMвЂќ, or similar, you did something wrong. Now just wait for it to find your flash device, and the *.ROM file on it.This should load up the BIOS updater from the boot block. As soon as you see the BIOS screen, hold down Alt, and hit F2. With the flash device still plugged into the system, restart the system. Now we can start the flashing process.If everything is good, then we can unmount the device.After you copy it, refresh the listings to make sure everything is in uppercase. Now, copy the renamed *.ROM file to the flash device.#mount /dev/sdd1 /mnt/temp/ -o rw,flush,uid=1000,utf8,shortname=win95

After the format completes (and your device activity comes to a halt), unplug the flash drive, plug it back in, and if necessary, unmount the device if it automatically mounts.Now that you have the drive properly partitioned, we need to format it.Set it up like the following:ДЎ7 heads, 32 sectors/track, 464 cylinders Insert your flash device, unmount it (if it gets automatically mouted,) and open it with fdisk.(For example, the EEE PC 1000 would be named вЂњ1000.ROMвЂќ, 1000H would be вЂњ1000H.ROMвЂќ) Due to how the boot block was written, the name is case sensitive apparently. Extract the *.ROM file from the *.zip file, and place it on your Desktop.Go to and find the latest firmware for your model. First, you need to get the proper firmware for the EEE PC you are going to flash.This took me a while to figure out, so I wrote directions to hopefully make it easier for other people.